Hueforge Japan Trees
Print Profile(1)
Description
Hueforge Japan Trees
Boost Me (for free)
Boost me please it's free :p
Membership
Thank you for supporting me in my work
Projet: Trees Japan.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 194.5x250mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.08mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#cc0000 PLA BambuLab Basic Red Transmission Distance: 5
This print uses 3 unique filaments
Instructions de changements:
Commencer par Charcoal
At layer #10 (0.88mm) swap to Jade White
At layer #17 (1.44mm) swap to Red pour le reste.
Please leave a comment and like if you like my Hueforge. Thank you very much.
Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial !!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)