Hueforge Tarzan| Disney honeycomb mode
Print Profile(1)
Description
✨ IF YOU LIKE MY MODELS FOLLOW AND SHARE ✨
Project: tarzan.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 220.11x330.16mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #10 (0.96mm) swap to BambuLab Basic BambuLab Green
At layer #14 (1.28mm) swap to BambuLab Basic Yellow
At layer #19 (1.68mm) swap to BambuLab Basic Jade White for the rest.
Nota: Para su perfecta alineación con otras imágenes en modo panal descargar el marco
https://makerworld.com/es/models/2684556-honeycomb-frame-for-hueforge#profileId-2973673
Nota 2: Para su perfecta alineación con otras imágenes en modo panal descargar la guía
https://makerworld.com/es/models/1361112-honeycomb-mode-guide-for-hueforge#profileId-1405828
Boost Me (for free)
Don't forget to hit like and save it so you can find it easily later!
Every boost helps me keep creating new designs I really appreciate your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)