Hueforge Tokyo JAPAN

Hueforge Tokyo JAPAN

Projet: Tokyo JAPAN.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 197.79x250mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.08mm

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #a6a9aa PLA BambuLab Basic Silver  Transmission Distance: 0.5
    #cc0000 PLA BambuLab Basic Red  Transmission Distance: 5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Instructions de changements:
    Commencer par Charcoal
    At layer #10 (0.88mm) swap to Silver
    At layer #11 (0.96mm) swap to Red
    At layer #19 (1.6mm) swap to Jade White pour le reste.
 

Please leave a comment and like if you like my Hueforge. Thank you very much.

Non-commercial !!!           Non-commercial !!!              Non-commercial !!!           Non-commercial !!!