Clone Troopers
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 172.64x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
#000005 PLA Elegoo Matte Black Transmission Distance: 0.5
#bf2b2b PLA Prusament Lipstick Red Transmission Distance: 3.9
#ff7338 PLA Anycubic Vibrant Orange Transmission Distance: 3.7
#ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5
#0032a0 PLA Inslogic Blue Transmission Distance: 3.6
#6f727e PLA PolyTerra Fossil Grey Transmission Distance: 0.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.32mm) swap to Lipstick Red
At layer #13 (0.64mm) swap to Vibrant Orange
At layer #15 (0.72mm) swap to Pure Yellow
At layer #22 (1mm) swap to Black
At layer #23 (1.04mm) swap to Blue
At layer #28 (1.24mm) swap to Fossil Grey
At layer #35 (1.52mm) swap to Jade White for the rest.
I have made changes to the printer setup and this will not pull through to the print if you print directly from the Handy App
Boost Me (for free)
If you like my design please consider giving me a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)