Viper - Free 3D Print Model

Search models, users, collections, and posts

RattlerX

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

A2L

P1P

X1E

H2D Pro

H2S

H2D

P2S

H2C

X1 Carbon

X2D

0.08mm layer, 1 walls, 100% infill

Designer

3.9 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 220x180mm in size

You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.77239mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
    #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Dark Gray
    At layer #15 (1.28mm) swap to Jade White
    At layer #20 (1.68mm) swap to Black
    At layer #27 (2.24mm) swap to Maroon Red
    At layer #30 (2.48mm) swap to Jade White for the rest.