Toothbrush Caddy by Littlecheese

Littlecheese

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

2 plates

4.4(11)

Open in Bambu Studio

Boost

112

178

Released

Description

My wife asked for a toothbrush caddy. She wanted something that was a two-tiered open air design that would accommodate multiple brushes and a tube of toothpaste. She wanted it to be multiple colors too (black and white).

The tabs on the two side walls can be very tight, it took me sanding them a little to get them seated fully. The feet are meant to be glued in place.

If you end up printing one, I hope it provides you many years of toothbrush storage happiness!

Comment & Rating (18)

@mchafik

Printed on my p1s in PLA, almost perfect. On the other hand, the parts allowing the two parts to fit together had to be filed down well. Satisfied.

The designer has replied

@Littlecheese

Looks great, I like the gold. It was designed to be a tight fit that requires sanding as I was not proficient enough with CAD to do it better, may revisit at some point.

@signthex

Print Profile

0.2mm layer, 2 walls, 15% infill

didnt come out well and flimsy when it finally did

The designer has replied

@Littlecheese

sorry that it didn't work well for you. Maybe the uprights were too loose in the upper and lower parts?

@enzo5590

Print Profile

0.2mm layer, 2 walls, 15% infill

tolerance is a bit tight but overall great print

The designer has replied

@Littlecheese

Designed to be a tight fit that you dial in with sandpaper or a file. May revisit the design to make that part a little easier.

@MasterGras

Print Profile

0.2mm layer, 2 walls, 15% infill

still have to do some sanding. In the end a very nice toothbrushes bolder

The designer has replied

@Littlecheese

Thanks for your feedback, designed to require sanding to dial in the fit. Really wanted a rock solid connection there. May revisit the design in the future.

(Edited)