Eintracht Frankfurt's Pride Grabowski & Hölzenbein
Print Profile(3)
Bill of Materials
Description
Eintracht Frankfurt Fanart - Frankfurt's Pride Grabowski and Hölzenbein Hueforge
I hope you like it! Subscribe to me so you don't miss any new uploads!
Select the desired size in the print profile. I have created profiles for 175x175, 150x150 and 100x100 mm
You can also scale the model along the X and Y axes as desired. The Z-axis MUST NOT be changed!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #11 (0.96mm) swap to Red
At layer #20 (1.68mm) swap to Ivory White for the rest
Boost Me (for free)
If you like my creation, please support me with a small boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)