Multi Tray

The Multi Tray is a truly 3 dimensional way to store more items without taking up any more of your precious flat surfaces - ideal when you have both larger objects (like a wallet and keys), plus some smaller items (like earbuds, car keyfob, USB drive, batteries or anything else).

Designed to be aesthetically sleek, extremely functional, and easy to print, it's the one-stop drop-off for all your pocket stuff. The bottom trays comfortably hold items up to 110mm deep x 100mm wide, while the top trays are 50mm deep, with the 2 side trays being 55mm wide and the centre tray being 90mm wide.

You may even be able to squeeze slightly larger items in, if you don't mind them sitting at an angle up on the edge a bit. And of course, if you have a larger or smaller print area, you can easily scale it up or down to suit your needs.

Printing notes: This has been designed to be as easy to print as possible, so you don't need any supports, and standard settings are fine, although you can change the number of walls or infill if you want. Due to the large size, I recommend applying gluestick to ensure it doesn't warp at the corners (but if it warps a little, it's at the back so it might still be ok).