Mechanical Rabbit Headset

Previously, I made three types of rabbit heads in black, white, and pink, but they were difficult to split, so they could only be printed with large-sized printers like the H2S. However, the original gaps of the mechanical rabbit could serve as splitting points, so I created a mechanical rabbit head mask, which also fits the size requirements of P-series printers. After two revisions, it also made it to the final round of MDBJ! The main body of this version of the mechanical rabbit head is split into 10 parts, which can be assembled with glue and connectors. Additionally, the carrot position requires magnets. After assembly, the carrot can be removed, and smaller items can be placed inside the carrot. Requires 15x2 size magnets, note that these are strong magnets. My frequently purchased magnet link: Small Round Strong Magnets High Strength Neodymium Iron Boron Magnetic Steel Permanent Rubidium Magnets Iron Sheet Buckle - Taobao.com Magnet quantity: The carrot position requires 8 magnets. The back of the rabbit head can have magnets for magnetic attachment/wall hanging, requiring 6 or 12 magnets. The total number of magnets needed is 14 or 20. Additionally, the rabbit head's eyes and nose are set to be visible from the outside, so you will need to purchase four-way stretch fabric in black and red. You can search for "four-way stretch" on PDD for the fabric; it should be transparent enough to see your hand through. Hot glue is needed to attach the eye fabric. Wrap the fabric around the eye, thread the fabric from the outside into the inside of the rabbit head, install the eyes through the fabric, adjust the fabric to be flat, then secure the fabric with hot glue from the inside. After securing, cut off any excess fabric with scissors. Summary: Requires 14 or 20 15x2 magnets, and four-way stretch fabric in red and black. Update 26.05.31: 1) Since the P1S has a printable height of 250mm, which is 6mm smaller than the P2S, the model has been modified to adapt to the P1S, and a P1S printable version has been added. 2) Added a non-hollow eye configuration, which includes a complete set of non-hollow expressions. Using this set of expressions eliminates the need for fabric.

Note: The model is for material use only, any group buying or commercial activity is strictly prohibited!!!