Print Profile(1)
Description
Just getting started with Hueforge and have been loving all the designs that I have been able to make. I have shared some of the ones that I wanted for everyone else to have. If you like the designs shoot me a boost. Really helps to get me noticed.
I have made the Base layer just a little thicker. This makes it so the it comes out thicker. I have also included a height modifier to help minimize the print times. Hope you enjoy
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Scarlet Red
At layer #17 (1.44mm) swap to Marine Blue
At layer #19 (1.6mm) swap to Ice Blue
At layer #22 (1.84mm) swap to Sakura Pink
At layer #26 (2.16mm) swap to Beige
At layer #28 (2.32mm) swap to Ivory White for the rest.
Boost Me (for free)
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)