2 Liter Bottle Watering Can by FabrizioCreations

FabrizioCreations

Household>Garden

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 5 walls, 15% infill

Designer

1.2 h

1 plate

4.9(17)

Open in Bambu Studio

Boost

108

162

140

Released

Description

For all your “Herbal” or plant needs

Came up with this cause some of my nutrients are measured by the liter, and some of them take 2 liters of water all together, i got tired of filling my little 1 liter watering can up twice.

This will fit perfectly on a 2 liter bottle, snug and everything

SOME TIPS FOR THE PRINT

Make sure the watering nozzle is placed on the bed

Run 4-5 walls with 15% infill

Go EXTREMELY SLOW for the first few layers (like 30mm/s slow)

Run supports but from the build plate only and use the generic supports not the tree supports

Have fun and happy growing

Comment & Rating (20)

@myglasses1994

Print Profile

0.2mm layer, 5 walls, 15% infill

printed really well. first layer was at 30mm travel. used provided settings and it printed mostly flawless. only one area was an issue inside the thread but it still works as intended

The designer has replied

@Fabcreations

Thank you so much for the support 😁

@cforms

Print Profile

0.2mm layer, 5 walls, 15% infill

👍

@Niteowl910

Print Profile

0.2mm layer, 5 walls, 15% infill

very clean print . this is a handy gadget for people that. can’t lift that heavy watering container to water their flowers. I printed as a gift for a 75 year old lady. fits on a standard water bottle also. the cheaper bottles tend to leak a little around the edge but propel bottle is sturdier and no leaking. thank you for the time and thought into this item. I already gave it to her so I can not take a picture at the moment. but it was a very clean print

The designer has replied

@Fabcreations

Thank you so much, for some reason I'm just now seeing this comment, I'm so glad it was of use

@Niteowl910

Replying to @Fabcreations :

She loves it! and mentions it now and then to me. THANK YOU is must really help her for her to keep bringing it up

@SM0KESCR33N

Boosted

Print Profile

0.2mm layer, 5 walls, 15% infill

Printed 2 of these... both came out perfectly in Bambu Labs clear PETG. I use these to water my plants with 1 liters as well as 2 liter bottles.

@meanwhile

Print Profile

0.2mm layer, 5 walls, 15% infill

easy print, works good.

@copynothing

Print Profile

0.2mm layer, 5 walls, 15% infill

me gustó

@AeonArchon

Print Profile

0.2mm layer, 5 walls, 15% infill

Printed perfectly at ludicrus speed lol

@Cmganja151

Print Profile

0.2mm layer, 5 walls, 15% infill

@jojobzh

Print Profile

0.2mm layer, 5 walls, 15% infill

@user_4212336936

Print Profile

0.2mm layer, 5 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (20)

License

Related Models

3 Bottle dryer

2 Liter Bottle Holder

Milk Bottle Vase

Bedside bottle holder