Print Profile(1)
Description
Feel free to leave a comment or a boost if you like the print
Boost Me (for free)
Your boost helps me create even more models! Thank you for your support 🙏✨
Instructions
You can resize, but be careful not to modify the Z axis
Print with 100% infill and a 0.08mm layer height, with a 0.16mm base layer
The model measures 205.8 × 170mm
You can print with higher layer heights below the 0.4mm base thickness
The maximum allowed thickness is 2.8mm and the actual thickness is 2.48mm
Filaments used:
- #000000 – PLA Bambu Lab Basic Black Transmission distance: 0.6
- #0056b8 – PLA Bambu Lab Basic Cobalt Blue Transmission distance: 1.2
- #e7ceb5 – PLA Bambu Lab Basic Beige Transmission distance: 8
- #ffffff – PLA Bambu Lab Basic Jade White Transmission distance: 5
This print uses 4 different filaments
Filament change instructions:
- Start with Bambu Lab Basic Black
- At layer #8 (0.72 mm), change to Bambu Lab Basic Cobalt Blue
- At layer #16 (1.36 mm), change to Bambu Lab Basic Beige
- At layer #26 (2.16 mm), change to Bambu Lab Basic Jade White for the rest of the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)