Magnetized Ventilation adapter
Copyright Claim
Magnetized Ventilation adapter
Boost
7
19
3
Print Profile(1)
0.24mm layer, 2 walls, 5% infill
Designer
1.7 h
1 plate
Boost
7
19
3
0
16
6
Released
Description
Adapter for exhaust fan on the X1C, usable with 100mm ventilation hose. 4 magnets keep it secure to the back while in use, while still remaining easy to remove if needed.
The magnet holes are for 10x3mm magnets, with glue, smaller should work as well.
Most any settings should work just fine, it's a very simple model. Suggested using minimum infill and maximum layer height to minimize print time.
Comment & Rating (3)
All
Print Profile
0.24mm layer, 2 walls, 5% infill
schould be 3 walls, got some holes on the curve above the foot
(Edited)
The designer has replied
0
Reply
Interesting, I have no holes in my attempt. Maybe it's a difference in flow configuration. But either way, 3 walls would surely make more sense if the aesthetics are important.
0
Reply
Print Profile
0.24mm layer, 2 walls, 5% infill
printed great
(Edited)0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld