Christmas snow ball town by davidkelly021

davidkelly021

Household>Decor

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

7.7 h

1 plate

4.6(52)

Fix for Roofs

7.5 h

1 plate

4.8(32)

0.2mm layer, 2 walls, 10% infill

1.2 h

1 plate

5.0(22)

0.12mm layer, 2 walls, 5% infill

8.5 h

1 plate

4.2(5)

Boost

297

509

126

1 k

535

Released

Description

Christmas snowball town holes modelled to allow micro led string lights to be inserted into the house of the town, space in the base of the model for a battery pack

Christmas

lamp

snow

Comment & Rating (126)

@Rayman

This is an amazing design. After reading some comments that the roofs do have a gap, i was not not shure to give it a try, but i decided to download the file. Surprisingly i discovered that the print profile is for the A1. So i adjusted the settings to the X1C with Bambu Basic PLA White. In the slicer preview i discovered also that the roofs do have gaps and i played a little with the settings. Here are my settings for a perfect print and fully closed roofs: - 0.16 hight - Infill: Gyroid at 5% - Wallbuild mode: Arachne - Tree support: Small Trees (just in case, but not really needed)

@TechMelt

Thank you for the advice! With these modified options i was able to get rid of the holes on the roof. Also a bit slower layers print speed helped as well.

@Rayman

Replying to @TechMelt :

Happy that it helped.

@Andy_E

Sehr schönes Modell. Ich habe mir erlaubt, die Basis ein bisschen zu modifizieren, so haben größere Akkus Platz. Vielen Dank

@lennie2k

Print Profile

Fix for Roofs

super model. easy to prints.

(Edited)

@TD3SIGN

Print Profile

Fix for Roofs

looks great, perfect print!!! Thank you very much for your design!!!

@KCO3DbyJ.R.

the globe doesn't sit flat on the base for me... and the houses aren't closed in the corners.... but you have to look real close to tell.... overall I like it.... lit it with colored fairy lights.... X1C/.4 nozzle/.2 layers/Inland PLA+ generic settings