Multiboard Regal

A small shelf for spice jars for the MultiBoard system.
MultiBuild | Free 3D-Printed Modular Organization System

For mounting, a 4x12 grid is required, 4 bolts at the outermost points (bolt-locked)
and a filled shelf occupies a total free grid of 6x12. Of course, do not build above it, otherwise you cannot remove the jars.

I store jars up to Ø45mm.

Then 6 jars fit into the shelf.

It is one of my first works, so it is built solidly, but I am not worried it might fall down.

Feel free to also check out my 45° variant if you, like me, need to store even more jars =)

requires a 250x250 print bed, then it can be printed at a 45° angle