Print Profile(2)
Description
[WARNING!!!]
Print this out of a high preformance material.
Any damage to or from your camera caused by this product is at your own risk.
test strength beforehand with a test print
A system to quicly attach and detach your camera strap or other carry systems.
(My print with PA12-CF broke at approximatly 50KG)
Print with 100% infill and a lot of walls on its side.
Assambly
Put the flat fork shaped piece in the slot on the main module, may take some force to click in place.
Thread the camera strap thru the hole, or a piece of rope with the Big hole version (BH).
now attach the knob to the camera using a strong piece of rope or paracord, make sure the slot it at the closed side of the main module.
done, that's it
Boost Me (for free)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)