Print Profile(1)
Description
Transparent PETG printed bookmark with an organza-like effect.
For other brands of PETG, do not set the temperature too high, around 220℃ (refer to the optimal temperature for your specific brand). For Bambu Lab PETG, default parameters can be used.
Most other settings can remain at default (A1, P2S, X2D print fine with default parameters). Setting line width to 0.5 only makes printing slightly faster, with no other significant impact.
If you want to scale down the print, be careful not to change the height. The thinnest part is 0.2mm; if the height is reduced, it will be impossible to print.
When removing, gently bend the build plate after cooling; do not forcibly pull.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)