Airpods Pro Phone Stand Case Shared by NotJoel

X+N

Shared by

Hobby & DIY>Electronics

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 3 walls, 15% infill

1.1 h

1 plate

5.0(1)

0.12mm layer, 3 walls, 15% infill

57 min

1 plate

3.3(9)

Boost

137

Released

Description

Airpods Pro case with phone stand

Fits 1st n 2nd gen airpods

airpods pro

airpods case

Comment & Rating (17)

@golferbobert

can you make an a1 mini print profile please?

The designer has replied

@NotJoel

I just uploaded it now. Let me know if it works!

@golferbobert

Replying to @NotJoel :

ok thanks!

@spazision

Print Profile

0.12mm layer, 3 walls, 15% infill

Top piece had to be printed in silent mode. In order to get a good print. However, print does not stay on airpo pro 2 case, so it’s a useless print. rating based on print quality. P1S - Bambu Basic PLA

(Edited)

The designer has replied

@DSLordloss

How come you had to print twice? what printer was used? what material was used? I’m only asking to see what could be the issue. I would also like to point out the design isn’t mine so seems a little harsh to score me based on that? I think in the description there was a comment about requiring a little glue in the lid.

@spazision

I guess you’re right on the rating. The rating should be on print quality only, and I rated it based on the usability of the print for what it’s meant for. I’ll update my rating. Printed on P1S - Bambu Basic PLA.

@ReturntoSender7

Print Profile

0.12mm layer, 3 walls, 15% infill

Great model

@user_958120774

Works great! I plan to remix and add a keyring attachment.

@tim.barchfeld20

Print Profile

0.12mm layer, 3 walls, 15% infill

The designer has replied

@DSLordloss

Why 1 star if you don’t mind me asking?

(Edited)

@rob_otter

Print Profile

0.12mm layer, 3 walls, 15% infill

Other Issues:does not fit good on my airpods.. the round shape does not keep it in place

@Rnosa

Print Profile

0.12mm layer, 3 walls, 15% infill

Other Issues:Tried it a few times with different filaments and it seems to always give a spaghetti failure. it happens before layer 80. The bottom piece seems to be at fault.