I wanted my bed to stop shacking during fast small moves so I explored a few ways and this is the best and simplest I've found :)
It slides over the rail carriage screws so you don't need to undo them, you will have to undo the lead screw nut and use a longer M3 screw to put it back on. I used 12mm long M3s to fix the bracket to the metal L shaped on and 10mm m3s and washer with T nuts to fix it to the 2020 bed frame. You can use a magnet from the top of the 2020 to turn and slide the T-nuts in position....Overall a pretty simple addition to your Sk-Go :)
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
30% Cubic
Filament:Atomic CF-ABS Carbon Fiber black
Notes:
I used 3 perimeters at 0.6mm extrusion width for strenght