Lieutenant Worf Star Trek Hueforge Bookmark
Print Profile(1)
Description
If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben
Lieutenant Worf Star Trek Hueforge Bookmark
50mm x 150mm Bookmark
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 50.03x150mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 2.88mm and the Actual Thickness is 1.84mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.1
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#9199a4 PLA Panchroma PLA Translucent Grey Transmission Distance: 6.8
This print uses 4 unique filaments
***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.08mm for faster print time***
***the layer numbers will be different but the layer height will be the same***
Swap Instructions:
Start with Black
At layer #4 (1.24mm) swap to Red
At layer #7 (1.36mm) swap to Cocoa Brown
At layer #9 (1.44mm) swap to Translucent Grey for the rest.
More Bookmarks can be found here
Hueforge Bookmark Book Nook can be found here
Check out my other models and hueforge files here
Don't forget to post pictures of your prints! Enjoy!
Boost Me (for free)
If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost!
Hope you enjoy!
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)