Print Profile(2)
Description
Feel free to leave a comment or a boost if you like the print
Boost Me (for free)
Your boost helps me create even more models! Thank you for your support 🙏✨
Instructions
You can resize, but be careful not to modify the Z-axis.
Print with 100% infill and a layer height of 0.08 mm, with a 0.16mm base layer.
The model measures 170 × 170mm.
You can print with higher layer heights below the 0.4mm base thickness.
The maximum allowed thickness is 2.64mm and the actual thickness is 2.24mm.
Filaments used:
- #000000 – Bambu Lab PLA Basic Black Transmission distance: 0.6
- #4c5f71 – Bambu Lab PLA Basic Blue Gray Transmission distance: 3
- #ffffff – Bambu Lab PLA Basic Jade White Transmission distance: 5
This print uses 3 different filaments.
Filament change instructions:
- Start with Bambu Lab PLA Basic Black
- At layer #8 (0.72 mm), change to Bambu Lab PLA Basic Blue Gray
- At layer #21 (1.76 mm), change to Bambu Lab PLA Basic Jade White for the remainder of the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)