Weekly tracker (parametric/customizable)

Parametric, customizable Weekly tracker. 

I recommend using PETG on textured plate or PLA on smooth PEI plate, for the best adhesion (at least that works the best for me).

You can add magnets to stick it to a fridge or magnetic board. I recommend using at least two 10mm diameter magnets. The magnet holes are parametric, so you can change their size or even add two more if you want a magnet to hold better, or if you want to try four smaller diameter magnets.

You can also change the height of the front part to add more text as a title. The moving parts also have space for you to add your own .svg file, or you can simply use the one I provided.

If you want to increase the space for the title on the front part, you will need to manually add all the text in the slicer. You can find instructions for it below.

INSTRUCTIONS BELOW

 All photos have descriptions below them.

If you are using pins with the lowest tolerance, you won't need to use glue. Once you've inserted them into the first piece, try pressing them against something to ensure a good fit. If you absolutly can't use the tighest one, try different ones, but then you will need to use instant glue. 
I've been using them for a long time and they are reliable.

If you have any problems, I'm here to help, so ask anything related to this model, or even anything else, and I'll be there and try to help (I'm active almost every day).

Check out my model I'm proudest the most: (click the picture)