Ice Giant Hueforge

Project: Ice Giant_V2_5Colors.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 108.4x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.51997mm

    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
    #ffffff PLA Sunlu Meta White  Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #21 (1.76mm) swap to Blue
    At layer #23 (1.92mm) swap to Cyan
    At layer #29 (2.4mm) swap to Sky Blue
    At layer #33 (2.72mm) swap to White for the rest. (swap with Black)