Woman drinking with her Cat Hueforge

Project: Woman Drinking with her cat_V2_Combo_6Colors.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 111.61x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #482960 PLA BambuLab Basic Indigo Purple  Transmission Distance: 1.1
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA Sunlu Meta White  Transmission Distance: 8
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #21 (1.76mm) swap to Indigo Purple
    At layer #23 (1.92mm) swap to Hot Pink
    At layer #26 (2.16mm) swap to Pumpkin Orange
    At layer #30 (2.48mm) swap to Yellow (swap with Indigo Purple)
    At layer #34 (2.8mm) swap to White for the rest. (swap with Black)