Extra Large Jumbo Brick Man

This model is a 500% version of this (https://makerworld.com/en/models/1407919-basic-brick-man#profileId-1461146) A friend of mine wanted a big version to put in his man cave. i used a H2D to print this so you will need a machine with similar build volume to print the pieces with the way i have them cut. My file is set to normal supports but i only used normal supports on plates 9 and 10 and used tree on all the other plates.

The Original designer of this model does state that when scaling up and down you may need to tweek some of the parts to keep the proper amount of friction so the moving parts function properly. i would say i was somewhat succesful with this but overall my arm and leg connections are alittle looser then i would prefer so keep that in mind if you decide to print this. i wasnt overally concerned with this since it will just be standing in a room but if you plan on posing him or moving him around the joints are alittle to loose.

This model stands roughly 42 inches tall (106CM)