Hueforge Print of the Resident Evil 4 game cover. I printed two versions, blue and orange. If you want to print with your own colours, just replace the dark blue and blue in the description file below with whatever colour you prefer!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA+ Sunlu Grey Transmission Distance: 2
• PLA+ Overture Dark Blue Transmission Distance: 7
• PLA Sunlu Meta Blue Transmission Distance: 3.5
• PLA Sunlu Meta White Transmission Distance: 5

Swap Instructions:

• Grey until layer #6 at 0.56mm
• Dark Blue until layer #12 at 1.04mm
• Blue until layer #17 at 1.44mm
• White for the rest.