Zhang Fangyi 庄方宜: Arknights: Endfield
Print Profile(1)
Description
Hello hello,
She cute, shy and most importantly she zaps our wallets also she's a spring onion or a leek!!!
Good luck everyone pulling…. Silver Wolf also just came out… wallet dried and probably gone…
Notes:
- Please only scale the X and Y dimension, do not change the Z dimension
- If printing without the 3MF file, please set initial layer to 0.16mm and subsequent layers to be 0.08mm.
- Had to print at 250x167.65mm, typically I prefer 200mm wide for most hueforge as A1 mini is capped at that width. If printing smaller scale, I recommended using 0.2mm nozzle.
- Swap out black with white filament post Layer 15 if you only have one AMS
Filaments Used:
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Mistletoe Green Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Yellow
At layer #7 (0.64mm) swap to Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Black
At layer #16 (1.36mm) swap to Mistletoe Green
At layer #21 (1.76mm) swap to Yellow
At layer #23 (1.92mm) swap to Jade White
At layer #26 (2.16mm) swap to Red
At layer #29 (2.4mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)