Canyon Spectral:ON - Portable Stand & Fork Mount

A custom 3-piece portable parking stand designed specifically for the **Canyon Spectral:ON CF 8** (Large frame). No kickstand needed — this stand mounts to the FOX 38 fork and props the bike upright anywhere.
 

**3-Piece System:**

- **Fork Mount** — clamps to the FOX 38 front fork leg via a half-circle snap-around the fork bolt. Can be installed on either the left or right fork leg — the model includes half-circle mounts on both sides. Secured with two velcro straps or zip ties through integrated strap slots. The two docking pegs attach with **M3x8 self-tapping hex head screws** (2 screws included) — screwed in for strength and to avoid print-in-place complexity. Branded with FOX logo and SPECTRAL ON text.

- **Post** — 190mm at a 5° angle, sized for the Large frame. Keyed so it can only install in the correct orientation. Friction fit into the foot.

- **Foot** — tripod/claw base with 3 splayed legs for stability. Slides onto the drive-side pedal crank arm. Post inserts from the back and is keyed to prevent backwards installation. Two keyhole slots on the back bottom accept the two pegs on the fork mount (smaller peg on top, larger on bottom) for correct-orientation-only docking. Features the **Fireball 3D flame logo** in red on the foot.

**How it works:**

1. Fork mount stays on the bike — attaches to FOX 38 fork with velcro straps or zip ties (installs once, lives on the bike)

2. Foot slides onto the drive-side crank arm

3. Post slides into foot from the back (keyed, friction fit)

4. Lower the fork onto the foot post — two keyed pegs lock it in at the correct angle

5. Bike stands upright on its own

**Fits:**

- Canyon Spectral:ON CF / AL — **Large frame** (post length sized for Large; other sizes may need adjustment)

- FOX 38 fork (fork mount clamps to fork leg bolt)

- Drive-side crank arm (standard width)

**Assembly (one-time setup):**

1. Attach the two docking pegs to the fork mount using **2x M3x8 self-tapping hex head screws** — drive them in with a hex key until snug

2. Mount fork mount to FOX 38 fork leg (either side) using velcro straps or zip ties through the integrated slots — this stays on the bike

3. Fork mount is now permanently installed; foot + post store separately
 

**Print notes:**

- Printed on **Bambu Lab H2C and H2D** — compatible with any Bambu Lab printer

- 3MF file includes full multi-color configuration pre-configured

- To print single color: open in Bambu Studio and remove color assignments

- **PETG HF or PETG Basic strongly recommended** — stronger, better heat resistance, and better UV stability than PLA

- PLA not recommended for functional/outdoor use

Designed by **Fireball 3D** — original design, not affiliated with Canyon Bicycles or FOX Racing Shox.

---

## Design Notes

- Bike: 2026 Canyon Spectral:ON CF 8 — Size Large

- Fork: FOX 38 Float Performance 160mm

- Post: 190mm, 5° angle — sized for Large frame

- All three pieces are keyed to prevent incorrect assembly

- Fork mount stays permanently on the bike; foot + post store separately

- Foot mounts on drive-side crank, post friction fits from rear

- Fork mount pegs: smaller top / larger bottom — ensures correct docking orientation

- Pegs attach with 2x M3x8 self-tapping hex head screws — for strength and printing simplicity (avoids print-in-place)

- Printed on Bambu Lab H2C and H2D