MTG Modular Counter

Have a deck that just demands more counter digits? I'm looking at you Krenko Mob Boss players.... :)  

This modular counter lets you add as many counter reels as you want! Although, anything beyond a 3-digit might freak your opponents out...just saying. 

Materials Needed:

Your Glue of choice. I prefer to use Stick Fast CA Thick adhesive with Mitreapel AC400 activator. 

     CA glue Stick Fast CA Thick Amazon link - glue

     Glue Activator Activator Amazon link - activator

Filament:

Bambu Lab Tough+ White

Bambu Labs Basic Black

Printing Profiles:

This was printed on the X1C and H2D. AMS required.

Assembly Instructions:

Check out the screenshot in the pictures for assembly. The print plates are also named to help identify the parts mentioned below.

1. Start with one End Stand and glue in a Connector (the longer "C" shaped piece)

2. Glue the center piece of a reel onto the protruding part of the connector

3. Place a reel around the center piece. Make sure your numbers are facing the right direction

4. Glue a spacer connector into the center reel piece opposite side

5. Put a washer around the center piece

6. Place a reel around the center piece. Make sure you check the numbers again

7. Glue a spacer connector into the center reel piece opposite side

8. Put a washer around the center piece

9. Place a reel around the center piece. Make sure you check the numbers again

10. Glue the final Connector into the center piece

11. Glue the End Stand onto the Connector

12. Done. 

Support me with a boost!