Peakychu Hueforge 5x7
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 127.24x179mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Purple Transmission Distance: 6
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Purple
At layer #16 (1.36mm) swap to Sakura Pink
At layer #19 (1.6mm) swap to Jade White for the rest.
I recently opened a page to keep all the things I'm working on, if your interested come and give me a follow!
https://www.facebook.com/nextopia3d/
Boost Me (for free)
Thanks for checking out my model! If you think its worth a boost then go ahead, thanks in advance!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)