Ankheg Bookmark – Hueforge

For Personal Use Only: Print as many as you like for yourself
Commercial License : Not allowed unless you hold a valid license on Makerworld or from my Patreon

Ankheg Bookmark – Hueforge

This Ankheg bookmark captures the moment a subterranean predator erupts from the earth. The segmented creature rises vertically within the narrow format, its chitinous head thrust forward and mandibles flared in a silent, predatory display. Long antennae stretch upward toward the top edge, enhancing the sense of height and tension. Jagged earth and fractured stone frame the lower half of the composition, suggesting violent emergence from below.

Designed specifically for Hueforge layered filament printing, the artwork relies on strong grayscale separation to achieve dimensional relief. Deep black filament layers define the void beneath the creature and the recessed shadows between its armored segments. Lighter tonal transitions articulate the ridged exoskeleton, curved mandibles, and jointed forelimbs. Fine texturing across the chitin plates creates tactile visual depth, particularly when illuminated from an angle, where highlights trace along the layered filament contours.

The elongated bookmark format intensifies the vertical thrust of the Ankheg’s body, guiding the eye from the dark, empty sky at the top down through the armored thorax and into the broken ground below. The heavy contrast between the pale exoskeleton and the surrounding darkness reinforces the creature’s alien, insectoid presence.

A circular cut-out at the top allows for optional ribbon or tassel attachment, maintaining functionality without interrupting the composition. Lightweight yet durable, this piece functions as both a practical reading accessory and a compact display artwork.

Ideal for fantasy collectors, tabletop role-playing enthusiasts, and admirers of monstrous creature design, the Ankheg bookmark delivers high-contrast drama, layered dimensionality, and subterranean menace in a refined monochrome Hueforge format.

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm

The Model is 155x50mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.44mm and the Actual Thickness is 2.84mm

    #151715 PLA Deeplee Black  Transmission Distance: 0.1
    #626f89 PLA Deeplee Blue Grey  Transmission Distance: 2.5
    #8e8f8f PLA Deeplee Grey  Transmission Distance: 1
    #ffffff PLA Deeplee White  Transmission Distance: 6.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.76mm) swap to Blue Grey
    At layer #12 (1.16mm) swap to Grey
    At layer #23 (2.04mm) swap to White for the rest.

You can see my other Bookmarks in this collection: https://makerworld.com/en/collections/14170968-bookmarks
 

You can Download a stand I have designed to fit  my Hueforge Artwork WITH a border at https://makerworld.com/en/models/1873510-hueforge-display-stand-for-prints-with-borders#profileId-2005518 or for Hueforges WITHOUT a border use this one: https://makerworld.com/en/models/1872617-hueforge-display-stand-for-prints-without-borders#profileId-2004540

If you print this model, please upload a photo of your result, Rate the print and leave a Review. 

Not only does it inspire others in the community, I'd love to see what people have done!