Dire Wolf Hueforge Bookmark

Project: Dire Wolf Bookmark.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 50x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.48mm

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #e5c8a2 PLA PolyLite Cream  Transmission Distance: 2
    #e6dede PLA Overture Matte White  Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #18 (0.84mm) swap to Blue Gray
    At layer #22 (1mm) swap to Cyan
    At layer #24 (1.08mm) swap to Cream
    At layer #28 (1.24mm) swap to White for the rest.