mareks3dprint

cover

1000018783.jpg

1000018782.jpg

1000018781.jpg

plate_1.png

78068181c391458c.jpg

0.42 layer high 0.6 nozzle use abs or asa becasue its better and stronger for outside but you can always use petg i have tested on pla-cf, petg-cf, abs-gf, pc, asa-cf and bet ofcourse was asa cf but pla cf was also good but i dont know how it will behave outside still testing but on my bicycle i have just abs and for couple months no problem at all and that small which go inside steering hole is easy to breake but i have have still default inside steeri would use 4 walls and gyroid infill and of course 25% on infill and use brim

0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

bicycle handle bar all you will need is m6 screw 50mm long and m6 bolt and before instalation you will need add some rubber for more grip

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models