Bin for HSW Remixed by Andrew

Remixed by

Andrew

Household>Other House Models

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

2x Bins @ 0.24mm layer, Solid Walls

Designer

7.2 h

4 plates

4.9(32)

0.24mm layer, Solid Walls

Designer

4.7 h

4 plates

5.0(13)

Boost

182

268

263

Released

Description

Doesn't require supports. I printed mine in PLA, but most filaments should work. I wasn't able to find a bin that I liked, so I designed my own. The bins are designed to line up with < 1mm in between to maximize the available space.

As the name suggests, the 2x bin is (roughly) twice as large as the 1x bin.

2023-08-27 Update:

Added “thin” versions of the bins. These have 1.5mm walls, compared to the 2.5mm walls of the original. The back is still 2.5mm to reduce the chance of damage when inserting and removing from the HSW.

bin

honeycombstoragewall

hsw

Comment & Rating (47)

@kellervater

Print Profile

0.24mm layer, Solid Walls

Pure awesomeness. Turn out perfectly smooth and robust!

@MechaMaker

Print Profile

2x Bins @ 0.24mm layer, Solid Walls

Great design and use!

@john.darst

Hey I was looking at the bins and see your allen wrench holder. Where did you find that design? I can't find it on makerworld. Thanks!

@user_4092671274

Print Profile

2x Bins @ 0.24mm layer, Solid Walls

perfect print!

@Cyrius_Simon

Print Profile

2x Bins @ 0.24mm layer, Solid Walls

merci pour cette conception. un peu, juste au niveau des attaches, car il a tendance à se déboîter, si l’on met un petit peu trop lourd

@RealWorldPrints

Print Profile

2x Bins @ 0.24mm layer, Solid Walls

Good design and functionally works but it's hard to print in PETG. I had issues with warping. cosmetic though and functionally it works and connects to the HSW ok. I recommend glue and textured plate for the 2x bins. the single width bins print very easily in PETG

@RealWorldPrints

Print Profile

0.24mm layer, Solid Walls

Prints but in PETG it gave me some issues on the corners. cosmetic imperfections is all. otherwise great. not an issue with the designers model. probably wet filament or seam alignments not randomized.