Ironman clock

Ironman wall clock

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.56mm

    #000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1
    #c12e1f PLA BambuLab Basic Red  Transmission Distance: 3.8
    #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8
    #f4ee2a PLA BambuLab Basic Yellow  Transmission Distance: 5.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Black
    At layer #14 (1.2mm) swap to White
    At layer #17 (1.44mm) swap to Red
    At layer #20 (1.68mm) swap to Yellow
    At layer #23 (1.92mm) swap to White for the rest.
 

For clock hands you can use the MH011 kit or purchase from amazon for a set of parts https://amzn.to/41t5wa4