Brazil Can and Long Neck Holder With Handle (v2)

🟢 Brazil Can and Long Neck Holder with Handle (Version 2)

I present to you this bottle and can holder developed especially for Brazil fans, this time with a handle, compatible with:

• Long neck beer bottles

• Compatible with all 473ml cans (Heineken, Monster Energy, Red Bull)

• Compatible with all 500ml European cans (Heineken, Monster Energy, Red Bull)

The 500ml model is for Monster cans from Europe, for cans from Brazil, print the 473ml model

🎨 Premium Design

The model was designed to offer a striking, elegant, and distinctive look:

• Upper band:
“58 62 70 94 02”
“Greatest World Champion”

• Lower bands:
“Onward to the Hexa!!”
“Go Brazil!!”

• Body of the model:
World Cup Trophy symbol in low relief, creating a premium finish

• Additional applicable element:
Brazilian National Team symbol to apply to the holder in 2 sizes of your preference

🔧 Symbol Assembly

To apply the symbol to the shape of the holder:

1. Heat the build plate to 80°C
2. Leave the symbol on top for 1 to 2 minutes
3. It will soften slightly
4. Mold it onto the can holder body, wait for it to cool, and then glue it

🖨️ Print Settings

• Nozzle: 0.4

• Layer Height: 0.16 (if your can or long neck holder comes out very marked, with visible layer lines, reduce the outer wall speed and activate the prime tower for a better finish, but the model in the photo was printed without a prime tower)

⚙️ Structure and Strength

• 2 walls
• Infill: 10% Gyroid

✔ Lightweight, resistant, and functional model

If you want more strength, increase to 3 walls and 15% Gyroid infill, but it works very well this way

🔗 See my other projects

Check out other available models, click on the photo to access:

🚀 Support the project

If this model helped you:

• Leave a like ❤️
• Comment with your print
• And if you can, send a BOOST 🚀