Stachu_mc

cover

IMG_20260413_164152.jpg

IMG_20260413_164203.jpg

IMG_20260413_164209.jpg

plate_1.png

<h3>Recommended Print Settings</h3>To get the best results with this model, I used the following configuration in Bambu Studio:<ul><li>Printer Profile: Bambu Lab X1C (also compatible with P1S/P1P and A1 series).</li><li>Layer Height: 0.16mm (Optimal profile) – provides a great balance between printing time and fine surface detail.</li><li>Initial Layer Height: 0.2mm (for better bed adhesion).</li><li>Wall Loops: 2-3 (recommended for structural strength).</li><li>Infill: 15% (I suggest using Gyroid for better stability and no nozzle crossing).</li><li>Filament: PLA (Works perfectly with PLA Basic, Silk, or Matte).</li></ul><h4>Support Settings</h4>This model requires supports to ensure a clean print of the overhangs.<ul><li>Support Type: Enabled</li><li>Support Style: Tree (Auto) – I highly recommend using Tree Slim or Tree Hybrid. They are very easy to remove and leave minimal marks on the model surface.</li><li>Top Z Distance: 0.16mm - 0.2mm (standard for easy detachment).</li></ul>

0.16mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Low-Poly Fantasy Dragon</h2>A stylized, low-poly dragon miniature with sharp geometry and a majestic pose. Its clean lines make it a perfect candidate for specialty filaments like PLA or Tri-color PLA SILK, creating a stunning display piece that catches the light from every angle.<h3>Print Settings</h3>To achieve the smooth finish and sharp edges seen in the photos, I used the following settings:<ul><li>Layer Height: 0.16mm (Optimal for clean surfaces and crisp geometry).</li><li>Supports: Required (I recommend using Tree supports for the wings and chin for easy, clean removal).</li><li>Material: PLA (Works best with Silk Tri-color or Dual-color filaments to highlight the low-poly facets).</li></ul><h3>Features</h3><ul><li>Modern low-poly aesthetic that looks great as a desk accessory.</li><li>Sturdy design with well-defined wings, horns, and tail.</li><li>Print-in-place (single piece) with minimal cleanup required.</li></ul>

Print Profile(1)

Description

Low-Poly Fantasy Dragon

Print Settings

Features

Comment & Rating (0)

License

Related Models