Hueforge Zenitsu (Demon Slayer) Honeycomb Mode
Print Profile(1)
Description
✨ IF YOU LIKE MY MODELS FOLLOW AND SHARE ✨
Project: zenitsu.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 284.05x244.18mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm
#34cee6 PLA Elego Cian Transmission Distance: 4
#000000 PLA Anycubic Black Transmission Distance: 0.8
#e62d2b PLA SM Red Transmission Distance: 5.2
#faee5c PLA SM Yelow Transmission Distance: 8.7
#ffffff PLA Anycubic White Transmission Distance: 7
This print uses 5 unique filaments
Swap Instructions:
Start with Elego Cian
At layer #6 (0.64mm) swap to Anycubic Black
At layer #10 (0.96mm) swap to SM Red
At layer #15 (1.36mm) swap to SM Yelow
At layer #19 (1.68mm) swap to Anycubic White for the rest.
Nota: para su perfecta alineación con otras imágenes en modo panal descargar la guía
https://makerworld.com/es/models/1361112-honeycomb-mode-guide-for-hueforge#profileId-1405828
Boost Me (for free)
Don't forget to hit like and save it so you can find it easily later!
Every boost helps me keep creating new designs I really appreciate your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)