Highland cow clock

Highland cow wall clock

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT.

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 2.96mm

    #000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1
    #f4ee2a PLA BambuLab Basic Yellow  Transmission Distance: 5.8
    #c12e1f PLA BambuLab Basic Red  Transmission Distance: 3.8
    #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 1.7
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Yellow
    At layer #10 (0.88mm) swap to Black
    At layer #11 (0.96mm) swap to Red
    At layer #16 (1.36mm) swap to Yellow
    At layer #21 (1.76mm) swap to White
    At layer #25 (2.08mm) swap to Cyan
    At layer #28 (2.32mm) swap to White for the rest.

For clock hands you can use the MH011 kit or purchase from amazon for a set of parts https://amzn.to/41t5wa4