Search models, users, collections, and posts
Casca
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.4 h
1 plate
Open in Bambu Studio
Boost
1
4
0
0
3
0
Released
Description
Project: Casca.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 128.39x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Brown Transmission Distance: 4
#a66301 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 2
#a6a9aa PLA BambuLab Basic White Transmission Distance: 0.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #11 (0.96mm) swap to Pumpkin Orange
At layer #18 (1.52mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)