AppleTV Mount
Print Profile(1)
Description
I needed a simple and sturdy holder for my Apple TV that I could attach to my VESA TV mount.
I designed the holder so that the ventilation is not obstructed and the Apple TV can be easily slid into the holder from the side with a slight incline, ensuring the ports remain accessible.
The hole spacing is approximately 50mm
I enlarged the holes slightly and used M3 heat-set inserts.
(If necessary, the holes can be enlarged in the slicer using a negative cylinder.
If there is demand, I can, of course, adjust the holes)
With this holder, I can use a short 300mm HDMI cable.
I use an Apple TV 4K and printed it in PETG. PLA Tough or similar
may also work.
The tree supports are nicely positioned in the recesses and can
be removed wonderfully.
If you have any questions or requests, feel free to ask!
Boost Me (for free)
I would, of course, also be very happy about a boost ;)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)