Parts cooler fan duct for Sovol SV01 equipped with an E3d Volcano hotend. It also has a flat spot for a NEOPIXEL LED light.
Prints without supports in it's original orientation. Mounts to the x carriage with 2x m3 (12mm and 16mm) screws (the top hole is not threaded and needs a nut). A 3rd m3x20 screw holds the fan with a nut inserted into the nut holder slot.
For best results print in PETG. PLA will work but may sag over time.
parts list:
24v 5015 fan
1 m3x12
1 m3x16
1 m3x20
2 m3 nuts