Froggy

cover

IMG_1708.jpeg

IMG_1709.jpeg

Bildschirmfoto 2026-05-14 um 16.22.46.png

plate_1.png

Da ich meine Ortlieb Trunk Bag für mein Fahrrad habe, ärgerte ich mich immer über den dummen Tragegurt von Ortlieb. Er verheddert sich, ist zu kurz und kann versehentlich die Verbindung zur Tasche verlieren. Also beschloss ich, einen Ring für die Tasche zu machen, damit ich jeden Gurt mit Karabinerhaken an der Tasche befestigen kann. In Fusion habe ich die Teile gezeichnet und mit PETG-CF gedruckt. Sie sind stabil und robust. Hinweis: Diese Halterung ist für eine Dicke von 4 mm und einen Zapfendurchmesser von 16 mm ausgelegt. &nbsp;Um den Ring zu montieren, müssen Sie die Seitenstifte abschrauben und den Ring auf den Stift schieben. Dann befestigen Sie den Stift wieder an der Tasche. Es sollte zu den folgenden Taschen passen:&nbsp;E-MateE-GlowPedal MateVelo ShopperTrunk BagTrunk Bag RCTrunk Bag RC Urban&nbsp;Ich hoffe, es gefällt Ihnen!

Since I have my Ortlieb Trunk Bag for my bike, I was always annoyed by Ortlieb's silly carrying strap It gets tangled, is too short, and can accidentally lose connection to the bag So I decided to make a ring for the bag so I could attach any strap with carabiners to the bag I designed the parts in Fusion and printed them with PETG-CF They are stable and robust Note: This holder is designed for a thickness of 4 mm and a pin diameter of 16 mm&nbsp;To assemble the ring, you need to unscrew the side pins and slide the ring onto the pin Then reattach the pin to the bag It should fit the following bags:&nbsp;E-MateE-GlowPedal MateVelo ShopperTrunk BagTrunk Bag RCTrunk Bag RC Urban&nbsp;I hope you like it

Ortlieb Hookring

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Since I have my Ortlieb Trunk Bag for my Bike I was always annoyed by the stupid carrying belt provided by Ortlieb. It tangles, it is too short and it can accidentally loose connection to the bag. So I decided to make a ring for the bag so that I can put any belt on the bag which has carabiner. In Fusion I drew the parts and printed them with PETG-CF. They are stable and sturdy. Note: This fixture is designed for a thickness of 4mm and a peg diameter of 16mm. &nbsp;In order to mount it, you have to unscrew the side pegs and slide the ring onto the peg. Then fix the peg again to the bag. It should fit to the following bags:&nbsp;E-MateE-GlowPedal MateVelo ShopperTrunk BagTrunk Bag RCTrunk Bag RC Urban&nbsp;Hope you like it!

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models