Supermaan12

cover

IMG_4462.jpeg

IMG_4626.jpeg

IMG_4625.jpeg

IMG_4461.jpeg

IMG_4627.jpeg

Main Base

plate_1.png

Socials Mix and Match

plate_2.png

Logo Customizable

plate_3.png

Main Sign

plate_4.png

QR Codes

plate_5.png

Pegs for Socials 

plate_6.png

Optional Base Weighted

plate_7.png

89d65a2521d7ca75.jpeg

Everything can be printed with a .4 nozzle but If you have a complicated logo I recommend doing that one in at least a .2 nozzle. I&#39;ve optimized everything so it is about an 18 hour print depending on how complicated your logo is. I can do the qr codes for you or even design your logo if you want to reach out directly. 3dcreationscorner12@gmail.com. Top slides in and out of the base perfectly and isn&#39;t too tight but feels solid. Feel free to glue it in if you want it more permanent. A lot of my customers travel so it being able to break down is an added benefit. The optional base has holes for 6x3mm magnets. (link below) The pegs attach to the main sign and social media logos. I would recommend gluing these. I may come out with a magnetic version for version two. &nbsp;I recommend for .4 nozzle: increase layer top layer line width to .45, top surface pattern monotonic line, and slow top layer speed down to 20mm/sec. Trust me. Set infill on the top to 20% adaptive cubic patter. for the base if you are adding weights and magnets (link below) print base at 15-20%. If not do at least 30% infill for the base. The weighted base should have a pause at layer 50 for you to add washers. I glue them down if there is space so there&#39;s no rattle but it&#39;s not necessary. &nbsp;Please give me a boost if you like this model! Lot&#39;s of hours have gone into this design!&nbsp;Link to Washers (weights): <a target="_blank" rel="noopener noreferrer ugc" href="https://a.co/d/0e8pa39h">https://a.co/d/0e8pa39h</a>Link to Magnets for Base: <a target="_blank" rel="noopener noreferrer ugc" href="https://a.co/d/0j0xI6Hp">https://a.co/d/0j0xI6Hp</a> 6x3mm

0.16mm layer, 2 walls, 20% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

There are a lot of hours in this design, failed prints, redesigns, and its field tested. I didn&#39;t want to add it until I was confident it would work and be solid!

Customizable QR Code Sign

ASIA

Print Profile(1)

Description

Comment & Rating (11)

License

Related Models