buzzie bee
Print Profile(1)
Description
boost for free , don't let your boost expire , boost to help me get filament
a beautiful buzzie bee
Project: bee .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model has been adjusted to fit the A1 Mini
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA bambuLabBlack Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Bambulab silver Transmission Distance: 1
PLA Bambulab White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to silver
At layer #20 (1.68mm) swap to White for the rest.
if you can spare the time please rate , like or follow or just collect
License
Comment & Rating (0)