Print Profile(1)
Description
Feel free to leave a comment or boost if you like the print
Boost Me (for free)
Your boost helps me create even more models! Thanks for your support 🙏✨
Instructions
You can resize, but be careful not to modify the Z-axis.
Print with 100% infill and a layer height of 0.08mm, with a 0.16mm base layer
The model measures 170.17 × 200mm
You can print with higher layer heights below the 0.4mm base thickness
The maximum allowed thickness is 2.64mm and the actual thickness is 2.32mm
Filaments used:
- #000000 – BambuLab PLA Basic Black Transmission distance: 0.6
- #c00d1e – BambuLab PLA Basic Red Transmission distance: 4
- #4c5f71 – BambuLab PLA Basic Blue Gray Transmission distance: 3
- #ffffff – BambuLab PLA Basic Jade White Transmission distance: 5
This print uses 4 different filaments
Filament change instructions:
- Start with BambuLab Basic Black
- At layer #8 (0.72mm), change to BambuLab Basic Red
- At layer #12 (1.04mm), change to BambuLab Basic Black
- At layer #17 (1.44mm), change to BambuLab Basic Blue Gray
- At layer #23 (1.92mm), change to BambuLab PLA Basic Jade White for the rest of the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)