Heart Box by RobertW

RobertW

Tools>Organizers

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

1.8 h

1 plate

4.0(4)

Open in Bambu Studio

Boost

245

119

Released

Description

A box in the shape of a heart. There are spots for three 6x2mm magnets to help keep the box closed.

There is a version with text and without.

It is probably best to print one or both parts with the hallow side toward the print bed. This will require more support but the outside surface will look better.

box

heart

Comment & Rating (7)

@darvil66

The print profile is no longer public

Justo lo que necesitaba. Gracias.

@davidedoubled1

The box is perfectly sized to contain a multitude of small objects such as rings, necklaces, and pins. Printed this a while back and only recently purchased a batch of magnets to finish the project. Magnet holes are perfectly sized for common small magnets you can find anywhere (f.e. on Amazon) and can apply them with any strong glue. I ended up gifting it to my girlfriend and she enjoyed it so much, especially as I had printed some rings alongside it. Thank you for your great work and am looking forward to the next.

@mangoon

The print profile is no longer public

Very Nice Box!!!

(Edited)

@ruslanbalkin

Print Profile

0.2mm layer, 2 walls, 15% infill

To me, looks like the white portion could be smaller, saving filament. Also I have to investigate why two halves are not exact match :-) There's a distinct line in between. I don't usually have tolerance issues, but maybe somethings wrong with the filament.