Cafe

This is an insert for the board game "Café", there are 4 files:
Print 1x Cafe.stl (if you encounter problems, I recommend using 0.2 horizontal expansion on this piece)
Print 4x cajitacafex4.stl. Please note that these boxes are not square, so they have a specific orientation. Do not force them.
Print 1x tapa.stl or, as an alternative, you can print 1x tapalarga.stl which is taller. I only printed tapa.stl, and it works fine for me.
I have printed everything at 0.2mm layer height.