FYTY112

cover

Default_Craft_an_image_of_a_tiger_tattoo11_with_a_face_engulfe_1_9df03dc5-e73f-4efa-b324-b9c4eb185ec1.jpg

photo_2024-03-14_17-37-54_f89815ee-2403-4c79-a689-43e956389337.webp

Default_Craft_an_image_of_a_tiger_tattoo11_with_a_face_engulfe_1_9df03dc5-e73f-4efa-b324-b9c4eb185ec1.webp

plate_1.webp

plate_1.png

0.08mm layer, 2 walls, 100% infill

2024-03-15_03h20_11_d37cb51e-a277-49ac-8fc7-471ca7933a4d.webp

2024-03-15_01h40_38_0b5afc59-dfa7-4c35-b12b-a04c3a7a585e.webp

paserak

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmFilaments Used:     PLA Gembird Black Transmission Distance: 0.6     PLA Kexcelled Red Transmission Distance: 4.5     PLA BambuLab Basic Yellow Transmission Distance: 6     PLA Creality Ender White Transmission Distance: 10Swap Instructions:     Start with Black     At layer #13 (0.68mm) swap to Red     At layer #27 (1.24mm) swap to Yellow     At layer #37 (1.64mm) swap to White for the rest.

200mm height, 0.04mm layer, 1 walls, 100% infill

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Yellow (PLA SLIK SUNLU) At layer #19 (1.6mm) swap to Jade White At layer #27 (2.24mm) swap to Black for the rest.

TIGER HUEFORGE TIGRE

Global

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models

hueforge tiger

hueforge tiger

Tiger Coloured Hueforge

Tiger Cub Tony