Update 27 Apr 2023: Removed from the files as v2 is the improved version. Added with a different catch design, the previous design is more prone to breaking.

Added . Read more below.

Update 24 Apr 2023: I realized model had overhangs as I overlooked the chamfer part when I enlarged it slightly, did a slight design change to remove the overhang .

Update 9 Apr 2023: Added another version that is slightly larger to account for the shrinkage when printing with ABS.

Added a catch design to release the extender together with the cover, since I always found it hard to take off the cover, and my pull tag came off.

The first model was printed with PLA and works well but might soften if set too high temperature. Printed with ABS and realized the ABS shrinkage caused the door to not fit well.

Remixed from https://www.printables.com/model/412181-eibos-easdry-extension-upgrade and https://www.printables.com/model/322923-eibos-easdry-upgrade

This design should increase the allowable spool width by 15mm, however installing , will reduce it to 12mm.

Use Eibos Easedry Extender.3mf for a tighter fit.

For Eibos Easdry Extender ABS v3.3mf, the shorter bits holding the catch can be broken when pushing the catch to unlock position, don't be alarmed if it is broken, it is designed to be temporary support while printing.

Eibos Easdy Extender Core.3mf is an optional attachment to stabilize the spool as I noticed it tends to slide towards the cover side, (probably because it is dropping into the open end of the core) So far did not experience any trouble with that so this part is good to have.

I have only started using it when I first released this design, there might be more issues that occur after using it for a while. I will update the design if I experience issues during my use.

Currently, this width extension is adequate for my use as I only need a few mm wider to fit my fattest spools. However, if you need an even wider extension, let me know how many mm more is required and I will create a new 3D model when I can.

*****

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DFAwHpP 

*****

Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C